CenOS6

nginx+pxe+tftpd+samba/nfs+dhcpd

无盘安装windows & linux

参考文档：

1.安装软件

yum -y install nfs-utils samba syslinux tftp tftp-server dhcp

2.配置网卡（bridge）---kvm等虚拟机需要桥接,这样才能支持pxe

vim /etc/sysconfig/network-scripts/ifcfg-br0
DEVICE="br0"
BOOTPROTO="static"
NM_CONTROLLED="no"
ONBOOT="yes"

IPADDR=192.168.0.1
NETMASK=255.255.255.0
GATEWAY=192.168.0.1
DNS1=192.168.0.1

TYPE=Bridge
DELAY=0


vim /etc/sysconfig/network-scripts/ifcfg-eth0
DEVICE="eth0"
BOOTPROTO="none"
NM_CONTROLLED="no"
ONBOOT="yes"

BRIDGE=br0

3.配置samba (共享windows安装源)

mkdir /smb/{win2008,win2012,win7_x64,win7_x86,win8e_x64,win8e_x86,winxp}

vim /etc/samba/smb.conf

# This is the main Samba configuration file. You should read the

# smb.conf(5) manual page in order to understand the options listed

# here. Samba has a huge number of configurable options (perhaps too

# many!) most of which are not shown in this example

#

# For a step to step guide on installing, configuring and using samba,

# read the Samba-HOWTO-Collection. This may be obtained from:

#  http://www.samba.org/samba/docs/Samba-HOWTO-Collection.pdf

#

# Many working examples of smb.conf files can be found in the

# Samba-Guide which is generated daily and can be downloaded from:

#  http://www.samba.org/samba/docs/Samba-Guide.pdf

#

# Any line which starts with a ; (semi-colon) or a # (hash)

# is a comment and is ignored. In this example we will use a #

# for commentry and a ; for parts of the config file that you

# may wish to enable

#

# NOTE: Whenever you modify this file you should run the command "testparm"

# to check that you have not made any basic syntactic errors.

#

#---------------

# SELINUX NOTES:

#

# If you want to use the useradd/groupadd family of binaries please run:

# setsebool -P samba_domain_controller on

#

# If you want to share home directories via samba please run:

# setsebool -P samba_enable_home_dirs on

#

# If you create a new directory you want to share you should mark it as

# "samba_share_t" so that selinux will let you write into it.

# Make sure not to do that on system directories as they may already have

# been marked with othe SELinux labels.

#

# Use ls -ldZ /path to see which context a directory has

#

# Set labels only on directories you created!

# To set a label use the following: chcon -t samba_share_t /path

#

# If you need to share a system created directory you can use one of the

# following (read-only/read-write):

# setsebool -P samba_export_all_ro on

# or

# setsebool -P samba_export_all_rw on

#

# If you want to run scripts (preexec/root prexec/print command/...) please

# put them into the /var/lib/samba/scripts directory so that smbd will be

# allowed to run them.

# Make sure you COPY them and not MOVE them so that the right SELinux context

# is applied, to check all is ok use restorecon -R -v /var/lib/samba/scripts

#

#--------------

#

#======================= Global Settings =====================================

    

[global]

    

# ----------------------- Network Related Options -------------------------

#

# workgroup = NT-Domain-Name or Workgroup-Name, eg: MIDEARTH

#

# server string is the equivalent of the NT Description field

#

# netbios name can be used to specify a server name not tied to the hostname

#

# Interfaces lets you configure Samba to use multiple interfaces

# If you have multiple network interfaces then you can list the ones

# you want to listen on (never omit localhost)

#

# Hosts Allow/Hosts Deny lets you restrict who can connect, and you can

# specifiy it as a per share option as well

#

    workgroup = WORKGROUP

    server string = Samba Server Version %v

    

;    netbios name = Jlive

    

;    interfaces = lo eth0 192.168.12.2/24 192.168.13.2/24

;    hosts allow = 127. 192.168.12. 192.168.13.

    

# --------------------------- Logging Options -----------------------------

#

# Log File let you specify where to put logs and how to split them up.

#

# Max Log Size let you specify the max size log files should reach

    

    # logs split per machine

    log file = /var/log/samba/log.%m

    # max 50KB per log file, then rotate

    max log size = 50

    

# ----------------------- Standalone Server Options ------------------------

#

# Scurity can be set to user, share(deprecated) or server(deprecated)

#

# Backend to store user information in. New installations should

# use either tdbsam or ldapsam. smbpasswd is available for backwards

# compatibility. tdbsam requires no further configuration.

    security = user

    passdb backend = tdbsam

#**********************************************************************#

    username map = /etc/samba/smbusers

# ----------------------- Domain Members Options ------------------------

#

# Security must be set to domain or ads

#

# Use the realm option only with security = ads

# Specifies the Active Directory realm the host is part of

#

# Backend to store user information in. New installations should

# use either tdbsam or ldapsam. smbpasswd is available for backwards

# compatibility. tdbsam requires no further configuration.

#

# Use password server option only with security = server or if you can't

# use the DNS to locate Domain Controllers

# The argument list may include:

#   password server = My_PDC_Name [My_BDC_Name] [My_Next_BDC_Name]

# or to auto-locate the domain controller/s

#   password server = *

    

    

;    security = domain

;    passdb backend = tdbsam

;    realm = MY_REALM

;    password server =

# ----------------------- Domain Controller Options ------------------------

#

# Security must be set to user for domain controllers

#

# Backend to store user information in. New installations should

# use either tdbsam or ldapsam. smbpasswd is available for backwards

# compatibility. tdbsam requires no further configuration.

#

# Domain Master specifies Samba to be the Domain Master Browser. This

# allows Samba to collate browse lists between subnets. Don't use this

# if you already have a Windows NT domain controller doing this job

#

# Domain Logons let Samba be a domain logon server for Windows workstations.

#

# Logon Scrpit let yuou specify a script to be run at login time on the client

# You need to provide it in a share called NETLOGON

#

# Logon Path let you specify where user profiles are stored (UNC path)

#

# Various scripts can be used on a domain controller or stand-alone

# machine to add or delete corresponding unix accounts

#

;    security = user

;    passdb backend = tdbsam

    

;    domain master = yes

;    domain logons = yes

    

    # the login script name depends on the machine name

;    logon script = %m.bat

    # the login script name depends on the unix user used

;    logon script = %u.bat

;    logon path = \\%L\Profiles\%u

    # disables profiles support by specifing an empty path

;    logon path =